HHSRS landlord guide: how councils assess hazards in England
In this article
The Housing Health and Safety Rating System (HHSRS) is the method councils use in England to identify and assess risks to health and wellbeing in residential property, whether rented or owned. An assessor inspects the home, links any deficiencies to specific hazards, scores the risk, then uses that score to guide whether action is needed.
What is the Housing Health and Safety Rating System (HHSRS)?
The HHSRS is described in official guidance as “a tool that is used to identify and assess risks to the health and wellbeing of people in their own home, whether rented or owned”. It is built on the idea that “all residential premises should provide a safe and healthy environment for any occupier or visitor”.
The key point for landlords and letting agents is that hazards can exist in any home, but the HHSRS focuses on the risk those hazards create. The guidance explains that “hazards will always be present in the home environment, but the risk posed by those hazards should be kept as low as possible”.
The system is designed to be proportionate and evidence based. The guidance says it “ensures a proportionate and evidence-based approach to assessment and enforcement which tackles the health impacts of poor housing”.
Does the updated HHSRS apply in England, and what changed?
The landlord and agent guide is clear that the updates “only apply to England”. If you manage property outside England, you should not assume the same rules apply. The guidance notes that “Wales has its own HHSRS regulations” and points readers to Welsh Government information.
The guide lists several changes intended to make the system more accessible. These include a shorter hazards list and changes to how the assessment is presented and banded.
- The number of hazards has been reduced “from 29 to 21”.
- “Suggested baseline indicators have been introduced.” These are designed to act as a checklist of reasonable standards that can be expected in a home.
- The likelihood of harm categories have been simplified “by grouping the sixteen numerical likelihood of harm categories into 4 bands, ranging from very likely to very unlikely.”
- Banding and categories are set out so that Category 1 sits in the High Band, and Category 2 is split into Medium and Low bands.
- A “refreshed set of case studies” has been produced to illustrate how assessments should be done.
Do landlords need to be trained HHSRS assessors?
The guide says “there is no requirement for landlords and property agents to become trained HHSRS assessors”. Even so, it also says landlords “need to keep their homes free of Category 1 hazards”.
That is why the guidance encourages a working familiarity with the system and what a Category 1 hazard looks like. It explains that understanding the HHSRS can help landlords “to manage properties in a way that considers risk reduction”, which in turn helps protect occupant health and wellbeing and “improve co-regulation with local councils”.
How does an HHSRS inspection actually work?
For a trained assessor, the guide says an HHSRS assessment “involves a 10-step process, as set out in the operating guidance”. The landlord and agent guide also says it provides a “simpler condensed version” for landlords and agents.
The broad flow described in the guide is:
- Inspect the property in full, including “any garden, yard or external structure”.
- Identify deficiencies (problems with design, layout, repair or maintenance) that may pose a risk.
- Link deficiencies to hazards. For each deficiency identified, the assessor decides which hazards it relates to.
- Assess likelihood of harm requiring medical intervention “over the next 12 months”.
- Assess severity and spread of harms, using defined classes of harm and national average spread of harm outcomes where appropriate.
- Calculate a hazard score, producing a separate score for each hazard and banding it.
What counts as a “deficiency”, and what are baseline indicators?
The guide says the assessment begins with “a full inspection of the property”. The assessor is looking for “any design, layout, repair or maintenance issues which may pose a risk to the health and safety of any occupiers or visitors”. Those issues are described as deficiencies.
During inspection, assessors “will have regard to the baseline indicators”, contained in the operating guidance. The baseline indicators are described as “broad in scope, ranging from drainage to fire safety and noise to pest management”.
It is important to understand what baseline indicators do, and what they do not do. The guidance says “while meeting these baseline indicators may not eliminate all risks, they help in addressing common housing deficiencies”. It also gives a practical rule for inspections: “anything that does not comply with the baseline indicators is a deficiency that needs to be assessed.”
For landlords, that makes baseline indicators a useful way to think about standards in the round. They are not presented as a guarantee that a home has no hazards, but they can flag areas likely to create risk that may need attention.
How do assessors decide the likelihood of harm, and who is the “vulnerable” person?
Once an assessor has matched a deficiency to one or more hazards, they assess “the likelihood of harm requiring medical intervention over the next 12 months”. The guidance clarifies that this means harm “more serious than a minor scratch or bruise”.
The guidance also explains that the assessor “must consider the likelihood of harm for someone in the most vulnerable age group rather than the actual occupant”. It defines the vulnerable group as “an age group of individuals who are most susceptible to the harm outcomes from the hazard in question”.
One example the guide gives is that “someone aged 65 or over is more likely to fall down the stairs”. The reason for using a notional vulnerable person is also set out: “assessing a house with the most vulnerable persons in mind ensures that the space is made safe not just for the current tenants, but for all potential occupants or visitors.”
The guide highlights one exception. It says: “The only exception to this is the assessment of ‘overcrowding and lack of living space’ which determines whether the house is suitable for the current household.”
To support the likelihood judgement, the guide says Part 2 of the operating guidance includes a detailed profile for each hazard, including “an average likelihood of harm for different property ages and types and lists factors that influence the likelihood of harm”. Assessors then apply “their professional judgement combined with the operating guidance” to decide whether the risk is higher or lower than the national average. For consistency, they are encouraged to benchmark against case studies, and landlords and agents can also use those case studies to understand how scenarios are scored.
How is the severity of harm assessed, and what are the four harm classes?
After deciding likelihood, the guide says the assessor assesses “how serious the harm is likely to be when an incident occurs”. It defines “four classes of harm” and provides examples:
- Moderate harm, for example “broken finger, slight concussion, or regular serious coughs or colds.”
- Serious harm, for example “sleep disturbance, chronic severe stress or mild heart attack”
- Severe harm, for example “asthma, mild stroke or serious fracture.”
- Extreme harm, for example “lung cancer, paralysis below the neck or death.”
The guide explains that an incident can have a range of outcomes across these classes, called the “spread of harms”. It says that for each hazard, Part 2 of the operating guidance provides “national average spread-of-harm outcomes based on statistical modelling of hospital admissions and other data”.
The assessor then decides whether to use the national average spread, or change it “to reflect the situation being assessed”. The guide notes that for many hazards, such as excess cold, “the spread of harm will often remain unchanged”. But it also says assessors “must use information relevant to the scenario being assessed to change the spread of harm outcomes when justified.”
One example in the guide relates to Falls on the Level. It says: “for the hazard Falls on the Level the national average for extreme harm is between 0 and 0.5%.” It then gives a scenario where the extreme harm percentage would need increasing to reflect a high risk situation (a young child falling from an unsecured window in a fifteenth-floor flat).
What are Category 1 and Category 2 hazards, and how do the score bands work?
The guide says the final stage is that “the likelihood and spread-of-harm scores are put into a mathematical formula to calculate the hazard score”. A separate score is produced for each hazard, and “the size of the score indicates the level of risk associated with each hazard”.
The score bands are set out clearly:
- “Scores of 100 or below will fall within the Low Band.”
- “Scores between 100 but less than 1,000 will fall into the Medium Band”, and both Low and Medium bands “will apply to Category 2 hazards.”
- “Scores of 1,000 or more will fall into the High Band which will apply to Category 1 hazards.”
The guide also points out that because “each hazard is scored separately”, a property can have “a mixture of Category 1 and 2 hazards at the same time”.
How does HHSRS relate to Awaab’s Law?
The guide includes a section on how the HHSRS and Awaab’s Law fit together. It says Phase 1 of Awaab’s Law “currently applies to social rented housing” and requires social landlords “to address all emergency hazards and all damp and mould hazards that present a significant risk of harm to tenants within fixed timeframes.”
It then sets out a government commitment and an expected direction of travel:
- “In 2026, government have committed to extend Phase 2 requirements to a wider range of hazards such as: excess cold and excess heat; falls; structural collapse; fire and explosions; electrical and hygiene hazards.”
- “In Phase 3, government will further extend requirements to the remaining hazards as defined by the Housing Health and Safety Rating System (HHSRS), with the exception of overcrowding.”
The guide also explains a difference in approach. It says: “Awaab’s Law is different to the HHSRS, however, as it is focused on the individual circumstances of the actual tenant rather than a notional ‘vulnerable’ occupant or visitor.” It adds: “An HHSRS assessment is not required under Awaab’s Law, but this HHSRS guidance will be useful for landlords to familiarise themselves with the revised list of HHSRS hazards as preparation for the extension of Awaab’s Law to more hazards.”
For private renting, the guide notes: “We will consult in the coming months on how to apply Awaab’s Law to private rented housing.”
Keeping inspection notes and follow up actions together can make it simpler to show what you have checked and when.
Frequently asked questions
- Does the updated HHSRS guidance apply across the UK?
- No. The landlord and agent guide says the updates “only apply to England”. It also states that “Wales has its own HHSRS regulations” and points to Welsh Government guidance. The guide does not describe rules for Scotland or Northern Ireland.
- Do I have to be trained to use the HHSRS as a landlord?
- The guidance says “there is no requirement for landlords and property agents to become trained HHSRS assessors”. However, it also states that landlords “need to keep their homes free of Category 1 hazards”, which means you need some familiarity with what those hazards look like.
- How does an assessor decide who they are assessing risk for?
- The guidance says the assessor “must consider the likelihood of harm for someone in the most vulnerable age group rather than the actual occupant”. It explains that this approach helps ensure a home is safe for “all potential occupants or visitors”. It notes an exception for “overcrowding and lack of living space”.
- What is the difference between Category 1 and Category 2 hazards?
- The guide explains that hazard scores of “1,000 or more” fall in the High Band and “will apply to Category 1 hazards”. Category 2 hazards are banded Medium and Low, with scores “between 100 but less than 1,000” and “100 or below” respectively. Each hazard is scored separately.
- Is an HHSRS assessment required under Awaab’s Law?
- The guidance says “An HHSRS assessment is not required under Awaab’s Law”. It also explains that Awaab’s Law focuses on “the individual circumstances of the actual tenant” rather than a notional vulnerable occupant, and that the HHSRS guidance is still useful preparation as Awaab’s Law expands to more hazards.
Sources and further reading
This article was written from the official pages below and checked before it was published. Rules change, so look at the official page before you act on anything here.
This is general information for landlords, not legal or tax advice. If you are unsure about your own situation, speak to a qualified adviser.